The Klarus RD16 is an extremely compact, ultra-bright rechargeable flashlight featuring the Klarus magnetic FAST connection charging system. (Charges the torch with a magnetic connector- so you don't have to remove the battery).
Ideal for outdoor use, backpackers, your vehicle and every day carry (EDC).
Utilizes the latest CREE XP-L LED, delivering an output of up to 380 lumens with a 16340 battery and a maximum run-time of 475 hours (19.8 days).
Patented self-locating magnetic FAST Connection charging system:
- When the charging cable is within 1cm of the charging port it self-locates to make the connection.
- The charging cable can be removed quickly and safely at any time, which makes the RS16 an effective flashlight to use in rapid response situations.
Side magnetic interface allows flashlight to be affixed to a metal surface and positioned to provide a hands-free light where required , for example, when working on vehicles.
Uses a standard USB port for charging, so you can recharge: at home, the office, vehicle, or anywhere that has a USB charging port available.
Strobe can be accessed whether the light is ON or OFF.
International SOS signal for emergency use.
Memory Function remembers the last mode you used.
Waterproof to IPX-8 Standard (underwater to 2 metres)
Any 16340 rechargeable battery with PCB protection can be used and charged directly.
Low loss, high intensity, portable USB charging cable.
Magnetic connector has built in short circuit protection (that makes it safer).
USB rechargeable interface on side of flashlight.
The tail point is tripod mountable via a standard UNC1/4′-20 thread.
Dark grey in colour, military spec, durable and scratch resistant.
Brightness: 380 Lumens
Modes: 4 output levels plus 2 flashing modes
* High: 380 Lumens (1.2h)
* Med: 83 Lumens (3h)
* Low: 5.5 Lumens (52h)
* Moonlight: 0.5 Lumens (457h)
* Strobe: 380 Lumens (2.4h)
* SOS: 380 Lumens (3.4h)
Colour: Dark grey
LED: CREE XP-L LED
Lens: Toughened ultra-clear glass
Reflector: Textured orange peel reflector
Working Voltage: 3.0V-8.4V
Charging: Input: 5 V; Output 4.2V/500 mA
Dimensions: 95.5mm (Length) x 22mm (Body) x 23mm (Head)
Weight: 54.8g (Excluding battery)
USB charging cable
one spare O-ring
1x 16340 (included)
(any 16340 battery with PCB protection)
*Warning: Only 16340 battery with PCB protection is rechargeable. CR123A batteries may be used, but cannot be recharged